Brass Pipe Fittings

Brass Pipe Fittings

Pipe Fittings

  • SAE Standards

  • Dryseal Threads

  • Forgings & Extrusions

Advantages
All pipe fitting threads are made to Dryseal standards.* Connectors, unions, nuts and extruded elbows and tees are machined from CA 360 and CA 345 brass; forged elbows and tees are machined from CA 377 brass.

Specifications
Meets functional requirements of the SAE J530 and SAE J531.

Applications
Use with brass, copper or iron pipe. Manufactured for low and medium pressure line connection work.

Working Pressure and Temperature Ranges
From -65° to +250°F. at 1000 psi.

Vibration
Fair resistance to vibration and pipe movement depending upon conditions.

Sizes
Pipe sizes are determined by the number of sixteenths of an inch in the pipe size.

Special Fittings
Fitting configurations and/or sizes other than those shown in the catalogue can be furnished. It is suggested that a print or sketch be submitted with the inquiry.

Metric Adapters

Metric Adapters

  • Economical

  • Reusable

  • Forgings & Extrusions

Advantages
To simplify the installation of pneumatic systems, Parker supplies a comprehensive range of adapters for NPT, BSPP, and BSPT pipe threads. Pipe nipples, pipe connectors, reducing connectors, pipe thread reducers, bulkhead female unions, elbows, tees, crosses and hex head plugs.

Parker brass adapters are produced from forgings and extrusions to meet exacting requirements. The hot forging process increases the density of the material, refines the grain structure and improves material strength.

Applications
Use with brass, copper, or iron pipe. Manufactured for low- and medium-pressure line connection work.

Working Pressure and Temperature Ranges
From -65° to +250° at 1000 psi.

Vibration
Fair resistance to vibration and pipe movement depending upon conditions.


ISO Port Adapters

ISO Port Adapters

  • Meets ISO 6149-3 Requirements

  • Meets SAE 2244-3 Requirements

  • Viton O-rings Standard

Advantages
To simplify the installation of hydraulic and pneumatic systems, Parker supplies a range of ISO Port Adapters for various sizes of metric threads and end configurations. Theses adapters include NPTF, flare, hose barb and NTA end configurations. Fluorocarbon o-rings are standard on all ISO adapters.

Specifications
Meets dimensional requirements of ISO 6149-3 and SAE 2244-3.

Applications
Use with brass, copper or J844 type A & B nylon tubing.
Manufactured for low and medium pressure line connection work.

Working Pressure and Temperature Ranges
Dependent on tubing or hose end connection

Special Fittings
Fitting configurations and / or sizes other than those shown in the catalogue can be furnished. It is suggested that a print or sketch be submitted with the inquiry.


Garden Hose Fittings

Garden Hose Fittings

  • Heavy Duty Construction

  • Coupler option

  • Use with Hose Clamp

Advantages
All fitting pipe threads are made to Dryseal standards. Connectors, unions, nuts and extruded elbows and tees are machined from CA 360 and CA 345 brass.

Temperature and Working Pressure Ranges
From +35°F. to +100°F. at 75 PSI maximum or the recommended working pressure of garden hose. (not to exceed 150 PSI.)
Note: 90GH is intended for use with 97HC hose clamp or crimped ferrule.
Note: All female connector ends should have a rubber washer (901GH-12) inserted prior to usage.

Sizes
Pipe sizes are determined by the number of sixteenths of an inch in the pipe size.
  • ENZED Connect App

    Put the ENZED Network
    at your fingertips
    Get the app!
  • Compact Spiral Hose

    Unprecedented 5000- and 6000-psi hose performance in a compact design.Read more
  • Nationwide Network.

    Nation wide hose and fitting supply, maintenance and service for your industry.Find your ENZED