Pipe Fittings & Adapters

Pipe Fittings and Port Adapters

Pipe Fittings and Port Adaptors

Adapters with thread types including: NPT, NPTF, BSPT, BSPP, SAE UN/UNF, and Metric. All the threads in this section are made to industry specifications with conformance shown in the table below.

 

Thread  Standard 
NPT  ANSI B1.20.1, FED-STD-H28/7 
NPTF  SAE J476, ANSI B1.20.3, FED-STD-H28/8 
BSPT  BS 21, ISO 7/1 
BSPP  BS 2779, ISO 228/1 
Metric  ISO 261, ANSI B1.13M, FED-STD-H28/21 
UN/UNF*  ANSI B1.1, FED-STD-H28/2 

*Class 2A or 2B 

Design and Construction

Shaped products (elbows, tees and crosses) are hot forged and machined, while straights are manufactured from cold drawn barstock. Where applicable, these products are made in conformance with the design criteria of the Society of Automotive Engineers Standards, SAE J514, J530.

Parker Fluid Connector products made from steel and brass, for the most part, have NPTF threads. Stainless steel products may have NPT or slightly modified NPT threads to minimize the chance of galling on assembly.

Standard Material Specifications: The standard materials used in the manufacture of Industrial Pipe and Adapter fittings are shown in Table U1 on page U2.

Note: Upon request, pipe fittings, adapters and plugs could be furnished in materials other than those shown in the material specifications chart.

Finish - Zinc plating with silver chromate (zinc chromium 6 free) is used on all standard steel products. Stainless steel fittings are passivated.

How Port Connections Work

Tapered (“Pipe”) Threads

There are three types of tapered threads commonly used in industrial applications.

  • NPT/NPTF
  • BSPT
  • Metric Taper

All three thread styles noted above use the same basic metal-tometal sealing design for achieving a seal. Although very similar, there are differences in the thread dimensions, pitch, and flank angle that do not allow interchangeability.

NPT / NPTF Threads

NPT threads, when assembled without a sealant, leave a spiral leak path at the crest-root junction as shown in Fig. F1. To seal pressurized fluid, NPT threads require a suitable sealant. NPTF threads (Dryseal), on the other hand, when assembled, do not leave the spiral leak path. This is because they have controlled truncation at the crest and root, ensuring metal-to-metal crest-root contact prior to, or just as the male-female thread flanks make contact as seen in Fig. F2. Upon further tightening, the thread crests are flattened out until the flanks also make metal-to-metal contact as seen in Fig. F3. Thus, theoretically at least, there is no passage left for the fluid to leak, provided all surfaces are flawless and dimensions exact. In reality, this is not the case and a sealant/lubricant is necessary to achieve a leak free joint, even with NPTF threads. The sealant/lubricant fills all imperfections in the surfaces affecting the seal and also provides lubrication to ease assembly and minimize galling.

For more information

View the Pipe Fittings and Port Adapters catalogue online.

  • ENZED Connect App

    Put the ENZED Network
    at your fingertips
    Get the app!
  • Compact Spiral Hose

    Unprecedented 5000- and 6000-psi hose performance in a compact design.Read more
  • Nationwide Network.

    Nation wide hose and fitting supply, maintenance and service for your industry.Find your ENZED